Standard Punches and Dies
- Standard Punches and Dies
- 90° Forming Punches and Dies
- Gooseneck Punches
- Acute Forming Punches and Dies
- Offset Die Sets
- Flattening Die Sets
- Adjustable Bottom Dies
- Box Forming Punches
- 4way / 3way Bottom Dies
- Die Holders, Riser Blocks and Ram Adapters
Special Die Sets
- Special Offset Die Sets
- Hemming and Standard Seam Die Sets
- Radius Die Sets
- Curling Die Sets
- Channel Die Sets
- Rib and Corrugating Die Sets
- Wiping and Rocker Dies
- Special Application Dies
European Style
- European Style 90° Tooling
- European Style 90° Acute Tooling
- Examples of Common Shapes
- Air Forming Tonnage Chart
Download our entire Catalog in PDF format!
Please click the catalog cover picture above to download a copy of our catalog in PDF format. If you do not have Adobe Acrobat, you can get it HERE.
Special Purpose Die Sets
Die sets 144 and 145 are tipped angle sets that are used to form deep channels in two hits. They are used for up to 12 gauge material. They may cause marking and bowing in longer length parts; and at heavier gauges, put extra wear on the ram of the press brake. Die set 146 makes a "W" shape in one stroke. A heel may be added for heavier gauge material. Die set 147 is used when the flange length is too short to be safely formed with standard tooling. This set has built in gauging and is heeled to prevent spreading.
Die set 148 is used to form a radius on a part that has preformed up-turned flanges on the ends. The bottom die has clapper plates to hold the flanges and help to minimize flange deformation while forming the radius.
