Standard Punches and Dies
- Standard Punches and Dies
- 90° Forming Punches and Dies
- Gooseneck Punches
- Acute Forming Punches and Dies
- Offset Die Sets
- Flattening Die Sets
- Adjustable Bottom Dies
- Box Forming Punches
- 4way / 3way Bottom Dies
- Die Holders, Riser Blocks and Ram Adapters
Special Die Sets
- Special Offset Die Sets
- Hemming and Standard Seam Die Sets
- Radius Die Sets
- Curling Die Sets
- Channel Die Sets
- Rib and Corrugating Die Sets
- Wiping and Rocker Dies
- Special Application Dies
European Style
- European Style 90° Tooling
- European Style 90° Acute Tooling
- Examples of Common Shapes
- Air Forming Tonnage Chart
Download our entire Catalog in PDF format!
Please click the catalog cover picture above to download a copy of our catalog in PDF format. If you do not have Adobe Acrobat, you can get it HERE.
Curliing Dies
Die set 122 and 123 or 124 are used in combination to form the smallest curls possible provided that the inside diameter is at least three times the material thickness. Die Set 123 is used when an off center curl is desired and required two hits; and 124 is used for an on center curl in three hits. When forming heavier gauge material, a tool steel insert can be used.
Die set 125 and 126 are used to minimize whip up. Die set 125 forms an off center curl in three hits, and die set 126 forms an on center curl in four hits. Both sets can be designed to accommodate material up to 16 gauge and curls between 1/4" and 3/4" inside diameter.
